Our Factory
Inside Our Factory
How a laser marking machine moves through our Yantai workshop — from frame assembly to tested, packed and shipped equipment.
01 — The Workshop
Production floor, real machines
02 — Production Flow
From bare frame to shipped machine
-
Step 01
Assembly
Cabinet, worktable, lift and motion hardware are built to the machine layout.
-
Step 02
Wiring
Controller, power supply, safety interlock and cooling harnesses are routed and connected.
-
Step 03
Alignment
Laser source, galvo head and lens are aligned so the beam is centered and stable.
-
Step 04
Testing
The machine marks test coupons and runs its marking parameters to confirm output.
-
Step 05
Inspection
Finished machines are checked for optics, controls and marking quality before release.
-
Step 06
Packing
Optics and sensitive parts are protected, and the machine is crated for freight.
-
Step 07
Shipping
Crated machines are handed to forwarders with the buyer's configuration and recorded test parameters, then supported remotely after delivery.
03 — Quality
Tested on real parts, then shipped
Every machine leaves our workshop after marking test coupons and an optical / control inspection. The parameters used are kept with the order, so our engineers can guide tuning after delivery. Specifications and marking results are confirmed by sample testing on your material.
Request a Quote
Tell us the material, part and marking content. We will recommend a machine built and tested through this workshop.